The
ultimate fabric for intense sun environments.
Thanks
to its unique construction process, Sunbrella provides protection and
years of service in intense sun areas like Arizona and other areas of
the Sunbelt, where UV rays will rapidly degrade the paint and interior.
Because of the use of acrylic fibers, which are naturally UV resistant,
Sunbrella has long been the recognized leader in long-wearing marine fabrics
for bimni tops, sail covers and deck enclosures. Besides marine
uses, Sunbrella is also used for commercial awnings due to its ability
to provide UV blockage with a rich, woven finish. The acrylic fibers
are solution dyed before the fabric is woven to assure the color goes
all the way through the fabric. Using a special finish process,
the material is then softened for use as a car cover fabric. The
fabric is exceptionally strong and, coupled with its UV resistance, it
also makes an excellent cover for RV's and trailers that spend extended
time stored outside.
|
|
Long
Lasting Strength - Acrylic fibers suffer minimal loss of
strength from exposure to heat, moisture and UV.
|
|
|
Fade
Resistant - Colors are a result of pigments which are actually
built into the fibers (solution dyed), instead of just dying the
finished fabric.
|
|
|
Water
Resistant - Treated for moisture resistance (but remember,
this material is primarily for UV protection).
|
|
|
Rot,
Mildew Resistant - Acrylic fibers resist growth that occurs
in moist environments.
|
Material
colors available - Pacific Blue, Sky Blue, Cadet
Gray, Jet Black, Toast, Burgundy
| Custom
designed for your vehicle. Sunbrella fabric.
|
| Paint
protection - Good.
|
| Rain/Snow
protection - Good.
|
| UV protection
- Best.
|
| Breathability
- Best.
|
| All-weather
protection - Better.
|
| Limited
Warranty - 5 years. |
| Pricing starting at: $395.00 |
A great value for outdoor protection.
NOAH
barrier fabric actually stops water, yet it "breathes" to allow
any trapped moisture, seam seepage or condensation to easily evaporate.
The unique patented construction process results in a cover with maximum
all-weather protection...highly water resistant, dust resistant, UV resistant
and breathable to make sure moisture and/or heat don't stay under the
cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only
4.45 oz./sq. yd., so it's easy to handle and fold.
|
Protective
Outer Layers - A bi-component spunbond, using sheath-core technology.
The inner core is polypropylene for strength, with a polyethylene
wrap for softness. A silver-gray color was selected because
of its heat-resistant properties. The fabric is also treated
with UV inhibitors for extended outdoor use.
|
|
Micro-Porous
Middle Layer - The
barrier layer is breathable film, a proprietary stretch-film technology
developed exclusively for Kimberly-Clark. The film is stretched
and subjected to a chemical process that creates microscopic holes
smaller than droplets of water or dust, yet large enough to allow
moisture vapor to escape.
|
|
Soft,
Paint-Protecting Inner Layer - A bi-component fabric made with polyethylene and nylon.
This combination results in an exceptionally high strength-to-weight
ratio, with the "soft touch" necessary for today's water-based
paint finishes.
|
Material color
available - Silver-Gray Pricing starting at: $198.00
- Maximum Protection Indoors & Out!
The
best high-performance fabric we've ever offered - a Covercraft exclusive.
WeatherShield?
uses the patented Nextec? encapsulation process, originally developed
for hihg-performance outdoor sports-wear. Their proprietary technology
uses precision and controlled placement of special polymers to make ordinary
fabrics extraordinary! The encapsulation process places
an ultra-thin film around the fabric fibers and precisely places
a durable, breathable barrier within the woven polyester fabric to
complete the high-performance process. Unlike traditional coatings
and laminations that just protect one side of the fabric, Nextec uses
up to 40 computerized process controls to place protective polymers inside the fabric, to shed water, and stop dust, bird droppings,
tree sap and industrial pollutants from reaching your vehicle's finish.
The
result is a fabric that provides maximum protection, but isn't bulky
and hard to store. Using Nextec encapsulation technology we've
created the ultimate car cover...and we named it WeatherShield because
no other fabric has every shielded your car or truck from the elements
like this one!
? Sheds
Water - Encapsulation
process assures fabric sheds water as soon as it hits the cover.
? Superior Dry Time - Because the fabric sheds moisture it has
an absorption factor of only 2%, compared with up to 40% for standard
woven and non-woven fabrics. That means, if the cover has been sitting
out in the rain you only need to shake it and the residue moisture will
easily dry, in the trunk or on the car.
? Breathable - Allows any heat or condensation under the cover
to easily escape.
? UV
Resistant - Special additives prevent UV degradation and protect the vehicles finish
and interior.
? Dust-proof - Patented fiber encapsulation process prevents dust from filtering through
the fabric.
? Scratch-less - Polymers provide a silky smooth finish to the fabric and provide superior
paint protection. Nextec fabric has been tested at 1,000 cycles
on abrasion wheels without scratching (surface must be clean and waxed).
? Durable - The encapsulation process is not affected by heat or cold and the process
won't degrade over the life of the fabric.
? Easy
Care - Unlike
non-woven fabrics you can clean most car-size WeatherShield covers in
your HOME washer and dryer.
?
 Packs
Small & Light - All this protection in a lightweight package that packs into 1/4 to
1/2 the volume of multi-layer, non-woven fabrics. That's a cover
for a Honda Accord he's holding - minimal storage space, but maximum protection!
Material
colors available - Gray or Taupe Pricing starting at: $298.00
Evolution?
/ Technalon? Ready-Fit? Covers
OUR
MOST POPULAR ALL-WEATHER FABRIC
Technalon
covers (made with Block-It? Evolution? fabric) feature 4-layer polypropylene
construction for maximum protection in all weather conditions. Often
imitated, but never equaled, this U.S. made fabric is used by millions
of satisfied car enthusiast around the world.
|
Naturally
Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings
will not harm the fabric.
|
|
Breathable - Dries quickly because air can easily circulate through the fabric.
|
|
Dust
/ Pollution Barrier - The two middle layers of Evolution fabric act as a filtration
barrier against most airborne pollutants as small as 0.1 microns
(smaller than talc).
|
|
Impact
Absorption - 4-layer thickness absorbs impacts better than any other vehicle
cover fabric to help protect the finish from nicks, dings, dents
and scratches.
|
|
Easy
To Use - Since the fabric is breathable, it doesn't trap air and "parachute"
during installation and removal. It also won't shrink or
stretch and retains its tailored shape.
|
|
Four
(4) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable
during normal use. Covercraft will repair or replace, to
the original purchaser, after required inspection.
|
Sizes
for cars, vans, pickups, SUV's and station wagons. Material color
- tan.
Pricing starting at:185.00
300
Series / Deluxe Ready-Fit? Covers
Providing
a protection level between the 200 and 400 series fabric, BLOCK-IT? 300
Series uses a 3-layer construction process, with an inner layer of polypropylene
melt-blown sandwiched by an inner and outer layer of spunbond fabric.
The fabric shares the technology features found in the Technalon? BLOCK-IT
400 Series, just at a reduced performance level and reduced cost.
|
Naturally
Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings
will not harm the fabric.
|
|
Breathable - Air easily circulates through the fabric to help it dry quickly
and reduce heat build-up under cover.
|
|
Dust
/ Pollution Barrier - The middle layer acts as a filtration barrier against most airborne
pollutants.
|
|
Impact
Absorption - 3-layer thickness absorbs impacts to help protect the finish
from nicks, dings, dents and scratches.
|
|
Easy
To Use - Since the fabric is breathable, it doesn't trap air and "parachute"
during installation and removal. It also won't shrink or
stretch and retains its tailored shape.
|
|
Three
(3) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable
during normal use. Covercraft will repair or replace, to
the original purchaser, after required inspection.
|
Sizes
for cars, vans, pickups, SUV's and station wagons. Material color
- dark taupe. Pricing starting at: $145.00
|
